Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Flatbush
If the heat in your Flatbush apartment comes on with a dusty smell, if one room stays cold while the rest of the unit bakes, or if you’ve spotted a dust streak creeping across the ceiling, the ductwork behind the wall is the place to look first. We work on exactly this kind of problem across Flatbush – the pre-war walk-ups and rowhouses around the 11226 corridor, where supply and return runs are shared between units and a single loose joint can ripple through a whole building. Our technicians have up to 13 years of experience on multifamily duct systems. Call (844) 917-3975 and we’ll set up a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Flatbush Homeowners Call Air Duct Cleaning Gravesend for Duct Repair & Sealing
The reason people in Flatbush reach out is usually the same: a duct problem that a general handyman couldn’t quite close out. In dense brick walk-ups, sealing a return isn’t a straight swap – it’s a coordination job. Landlord, super, co-op board, the tenant upstairs. We plan for that reality from the first call.
That’s also why so many Flatbush building owners come back to us for the full scope, not just one visit. Cleaning, repair, sealing, and sanitizing all run through the same relationship, so a sealed duct doesn’t get recontaminated the following season. We use professional-grade equipment from Rotobrush for agitation and source removal, and Abatement Technologies containment gear to keep dust from migrating into a neighbor’s unit mid-job – a detail that matters when the walls are shared.
Response into Flatbush is direct. We book around your building’s access windows, work the Flatbush neighborhoods from Ocean Avenue across to Nostrand and down toward Flatbush Avenue, and we send a written estimate before anything starts. One flat price per system, agreed up front. If a neighbor’s renovation has been pushing dust through a shared return, we can confirm it with a camera inspection rather than guesswork.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Flatbush
Not every Flatbush duct problem is the same. Original galvanized joints fail differently than a crushed flex run behind a drop ceiling, and some jobs need mastic while others need the metal patched first. Here’s how we break it down.
Duct Sealing
Sealing addresses the invisible leaks that quietly bleed conditioned air into a wall cavity or a shared shaft. In Flatbush’s older multifamily stock, those leaks are often at elbows and connector joints on runs that cross unit lines. We seal with mastic or foil tape rated for the specific duct material, so the seal holds through a full heating season, not just until the first cold snap.

Flex Duct Repair
Early forced-air retrofits in pre-war buildings often used flex runs that have since been crushed, kinked, or pulled loose at the boot. When airflow is already tight in an undersized system, a crushed flex run at the air handler starves the blower and pushes static pressure up. We reconnect, re-support, and reseal those runs so the system isn’t fighting itself.

Metal Duct Repair
Original galvanized ducts in Flatbush’s 1900s-to-1930s brick buildings develop loosened joints and pinhole leaks at the elbows. Standard mastic alone won’t hold over a compromised joint. We repair the metal first – patching, re-crimping, or replacing the section – then seal it properly so the fix lasts.

Duct Insulation
Flatbush summers are humid and winters run heavy on heating degree days, and that swing loads older metal duct runs with condensation and dust buildup. Insulating exposed runs in unconditioned spaces helps keep the duct surface above the dew point and reduces the condensation that feeds musty smells in damp spring weather.
If you’re not sure which of these fits your unit, the duct repair & sealing team can diagnose it with a camera inspection first. That keeps the scope honest and the estimate accurate.
Trusted Brands We Service in Flatbush
Where air-quality hardware is part of the job, we work with brands your HVAC technician already trusts. Honeywell and Aprilaire components are common in Flatbush buildings that have been updated over the decades, and we’re set up to work alongside them rather than around them. Guardsman sanitizing products are applied after debris removal to neutralize what mechanical cleaning leaves behind, which matters in damp, closed shafts where mold and bacteria can settle into the seams. We don’t claim to stock parts locally – we order and schedule around your job. If your building has an Abatement Technologies or Rotobrush system in play, tell us on the call and we’ll plan the access around it.
See the difference
Before
After
Before
After
Before
AfterCommon Duct Repair & Sealing Problems We See in Flatbush Homes
These come up again and again in Flatbush buildings, and they come up because of how the buildings were constructed, not because anyone did anything wrong.
- Shared wall-stack returns bleeding between units. In Flatbush walk-ups, a return riser can serve several apartments, so sealing just one unit’s registers keeps re-failing until the shared stack is addressed. That usually means getting sign-off from a co-op board or the landlord before a technician can start.
- Loose joints and pinhole leaks in original galvanized. The 1900s-to-1930s brick buildings on Flatbush’s side streets have duct runs that have been cycling through heat and humidity for a very long time. Elbows and connector joints loosen, and mastic won’t hold over failed metal until the section is repaired.
- Undersized retrofits running high static pressure. Early forced-air conversions in pre-war Flatbush buildings were fitted into spaces not designed for them. A crushed or unsealed flex run starves the blower and overworks the motor, which shortens its life.
- Renovation dust drifting through shared returns. When one apartment is renovated, dust travels into the next through shared returns. It’s a real reason a neighbor’s unit suddenly needs cleaning – and it’s the reason we set containment before we open anything.
Pricing for Duct Repair & Sealing in Flatbush, NY
Here’s what a Duct Repair & Sealing job in Flatbush typically runs. These are estimates for the market, not quotes – the written estimate sets the final price.
| Service | Typical Flatbush range |
|---|---|
| Duct sealing (mastic, per accessible run) | $180 – $420 |
| Flex duct repair (reconnect and reseal at boot) | $220 – $480 |
| Metal duct repair (patch or re-crimp a joint) | $260 – $650 |
| Duct insulation (exposed runs, typical apartment) | $300 – $750 |
| Full air leak repair (whole apartment, multifamily) | $550 – $1,400 |
What pushes a job toward the top of the range: original galvanized that needs repair before sealing, shared risers that require coordination with a landlord or board, and access through a wall chase or above a drop ceiling. Multifamily buildings sometimes cost more than a single-family home because of the coordination, not the labor. The free estimate is where that gets sorted out. Call (844) 917-3975 to book one.
We Also Serve Cities Near Flatbush
If you’re just outside Flatbush, we also work in Kensington, Flatlands, Midwood, and Borough Park, so a shared building that straddles the line doesn’t create a scheduling headache. Learn more about how we serve Flatbush and the surrounding neighborhoods, or call us for a free estimate wherever your building sits.
Serving Flatbush, NY – Our Local Coverage Area
We serve Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Flatbush
Responsibility usually falls on whoever owns the shared shaft or riser, which in most Flatbush co-ops means the building or the board, not the individual shareholder. The practical move is to get the board’s sign-off in writing before any work is scheduled, then have the technician document the condition with photos so the decision is clear. We can provide a written scope for that conversation. Call (844) 917-3975 for an exact quote – estimates are free.
A camera inspection is the only reliable way to tell. Normal dust shows up as an even film in the register; a leak usually shows as a concentrated streak on a ceiling, a dust ring at a joint, or a room that runs cold while others are warm. If the pattern is uneven, you’re probable looking at a leak. Call (844) 917-3975 and we’ll schedule an inspection.
Yes, and it usually does. In Flatbush’s 3-to-6-story brick walk-ups, supply and return runs often cross unit lines or tap into shared wall shafts, so sealing one apartment’s registers changes static pressure and airflow for tenants above and below. That’s why coordination matters here more than it does in a single-family house. Call us before work begins so the plan accounts for the whole shaft.
A shared dryer vent stack gets cleaned along its full run and checked for crush points, disconnected joints, and lint buildup where the stack bends. In older Flatbush buildings the stack can be the single biggest fire risk in the building, and it’s often overlooked because it’s behind a wall. Sealing the joints after cleaning keeps lint from escaping into the shaft. Call (844) 917-3975 – estimates are free.
Plan for access coordination, containment, and a clear schedule. Every occupied unit that ties into the shared run needs a window to be open, and containment gear needs to go up before any duct is opened so dust doesn’t drift into a neighbor’s space. Expect a professional-grade HEPA setup to run during the work, and expect the technician to photograph each joint before and after sealing. Call for a written scope before you book – the estimate is free.
Ready to close the loop on your Flatbush duct system? Call Air Duct Cleaning Gravesend at (844) 917-3975 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Cleaning, repair, sealing, and sanitizing under one roof, with professional-grade equipment your HVAC technician already recognizes – and a written price agreed before work starts.
Written by the team at Air Duct Cleaning Gravesend.