Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Why Gravesend Homeowners Choose Lennox Air Duct Cleaning
We provide independent Lennox air duct cleaning and service in Gravesend, NY, for owners whose forced-air systems run on Lennox equipment. What makes our Lennox work different is that we treat the ducts and the coil as one system: we clean the full run, clean the evaporator coil, and seal the leaks that let debris back in, instead of clearing one section and leaving the rest. We are not affiliated with, authorized by, or a dealer for Lennox. We’re an independent local service provider, so our advice stays on what the equipment actually needs rather than on paperwork.
Gravesend homes don’t sit still. The housing here is dominated by attached brick two- and three-family houses, and most of them share a forced-air system across floors. That shapes every Lennox job we see: separating one apartment’s return from another’s comes before cleaning can start. Families, landlords, and property managers call us because dust, musty odor, and weak airflow show up on the same equipment, and the fix has to account for both the Lennox unit and the multi-family layout around it.
Our technicians have up to 13 years of experience, work with professional-grade Rotobrush and Nikro equipment, and handle the whole scope in one service relationship: Full System Cleaning, Evaporator Coil Cleaning, Duct Sealing, sanitizing with Guardsman, and dryer vent work. Call (844) 917-3975 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Independent Lennox service in Gravesend, not a dealer and not affiliated with Lennox.
- Lennox Merit, Elite, and Signature equipment handled, including variable-speed and communicating air handlers.
- Full System Cleaning, Evaporator Coil Cleaning, and Duct Sealing as one coordinated job.
- Multi-unit return separation handled first in Gravesend’s attached two- and three-family homes.
- One flat price per system agreed before work starts, with before-and-after photos of your own ducts.
Why Trust Air Duct Cleaning Gravesend for Your Lennox Air Duct Cleaning?
Lennox builds several generations of blower and coil design into the same brand, and those differences change what the ducts need. A Merit Series PSC blower and a Signature communicating air handler with an ECM blower don’t fail the same way, and treating them as identical is where a lot of duct work goes wrong. Our technicians have up to 13 years of experience reading exactly those differences: how airflow is set, where static pressure climbs, and where a return leak pulls debris back onto a cleaned coil. That’s the expertise behind a Lennox job that holds up.
On parts, we’re specific. Where fit and communicating-system compatibility matter, we use Lennox OEM filters, gaskets, and coil components. For duct repairs we use quality aftermarket flex, mastic, and foil tape, because those are commodity materials where the brand on the box matters less than the seal. We don’t stock or order genuine Lennox parts as a rule and we’re not a Lennox dealer. We’re an independent service provider that repairs and services the brand.
Warranty safe service means not doing anything that forces you to prove what happened. Documentation matters: before-and-after photos, static pressure readings, and a written scope before work begins. If your Lennox system is under a manufacturer warranty, sealing and cleaning done to spec shouldn’t put that at risk. What can complicate a warranty claim is undocumented work, a disconnected return nobody recorded, or a coil left matted and blamed on the equipment. We write down what we found and what we did. That protects you, and it protects the equipment.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Fix in Gravesend
These are the failure modes we actually run into on Lennox systems in Gravesend, in the order they usually show up.
- Merit Series PSC blower wheels packed with lint. The squirrel-cage wheel on a PSC blower gathers dust and lint on its fins, and as the wheel loads up it moves less air while the motor works harder. In these older attached Gravesend homes the low basement ceiling puts the blower closer to storage clutter, so more lint finds its way in. The symptom owners notice is weak heat and dust settling quickly after cleaning; the cause is the wheel, not the duct run. Cleaning the blower is part of the job, not an upsell.
- Elite and Signature variable-speed air handlers hiding a restricted coil. ECM and variable-speed blowers compensate. They ramp up when airflow drops, so the system keeps running and the thermostat never shows a fault you’d notice. Then static pressure rises, the evaporator coil ices, or the system shorts cycles. By the time a homeowner calls, the coil has usually been restricted for a while. This is one reason we take static pressure readings on variable-speed Lennox equipment before quoting anything.
- CX and CH series cased coils matting on the fin face. When return-side filtration is weak, dust mats the face of a Lennox cased coil instead of passing through. That raises the delta-T across the coil and creates condensate problems, including the mildew smell that Gravesend homeowners report between heating and cooling season. Coastal Brooklyn’s humid summers push heavy AC use through the same ducts that carry winter heat, so the coil stays wet and the dust stays stuck.
- Signature communicating systems logging airflow faults from duct leaks. An iComfort thermostat on a Signature system will log airflow faults that trace back to leaky flex duct or a disconnected supply run, not a bad control board. Because the houses are attached wall-to-wall with shared party walls, a duct run can cross into a neighbor’s unit and confuse readings on both sides. We trace the run before we touch the board.
- Return plenums and flex runs snaked where no permit drew them. In Gravesend’s low basement ceilings, flexible duct and return plenums are often routed in ways nobody planned. A crimped flex run behind laundry or storage can strangle airflow to an entire floor. When we clean, we chart what’s actually there so the map matches the house.
A typical job on a Lennox Elite or Signature air handler starts with weak airflow and a thermostat logging static-pressure or airflow faults, even though the filter was changed on schedule. The usual cause is a matted evaporator coil face and a dust-loaded blower wheel pulling debris through leaky return flex. A qualified local pro typically pulls the blower, cleans the coil in place, seals the return plenum and any disconnected flex runs, then verifies static pressure and airflow before closing up. On older Merit furnaces the same symptom can trace to a partially blocked secondary heat exchanger path, which gets checked before any duct work is quoted.
Lennox Parts & Our Repair-vs-Replace Approach
Parts decisions on Lennox equipment come down to one question: does fit and system compatibility matter here? Filters, gaskets, and coil components on communicating systems do. A gasket that doesn’t seat or a filter that restricts the wrong amount of air will throw off everything the ECM blower is trying to do, so those we source to Lennox spec. Flex duct, mastic, and foil tape are different. Quality aftermarket materials seal as well as anything branded, and we use them. To be clear, we don’t claim to stock, carry, or order OEM or genuine Lennox parts as a standing practice. We repair and service the equipment with parts that fit it.
Repair versus replace is where honesty earns trust. On an older Merit furnace with a cracked heat exchanger or a failed ECM blower, replacement deserves a real conversation, not a push. Sometimes a repair buys years. Sometimes it doesn’t, and we’ll say so plainly. Call (844) 917-3975 for a free estimate and a straight answer on which side of that line your equipment sits.
Our Lennox Service Process – Step by Step
- 1
Diagnosis. We start with airflow, not the ducts. Static pressure readings, blower inspection, and coil face condition tell us whether the problem is a matted CX/CH coil, a loaded PSC wheel on a Merit, or a duct leak confusing a Signature communicating system. Then we map the duct run, including any shared-wall crossover in a two- or three-family Gravesend house.
- 2
Repair and cleaning. Depending on what diagnosis found, that’s Full System Cleaning with Rotobrush and Nikro equipment, in-place Evaporator Coil Cleaning, or Duct Sealing where return leaks are pulling debris back in. Where a coil has to come out, we say so up front rather than working around it.
- 3
Test. We re-read static pressure and verify airflow after sealing and cleaning. On communicating systems we confirm the iComfort thermostat is clear of airflow faults before we call the job done.
- 4
Warranty and documentation. You get before-and-after photos of your own ducts, a written record of what was found and sealed, and a clear note of what was replaced. That record is what supports your Lennox warranty if anything comes up later.
See the difference
Before
After
Before
After
Before
AfterLennox Products We Service & Install in Gravesend
We service and install across the Lennox lineup: the Merit Series (ML, XC, and EL furnaces and air handlers), the Elite Series (EL and XC variable-speed air handlers and furnaces), and the Signature Collection (SL, XC, and XP communicating systems), including Dave Lennox Signature Collection variable-capacity units. That covers single-stage, two-stage, variable-speed, and communicating equipment. We also work with the cased evaporator coils in the CX and CH series, which is where a lot of Gravesend airflow complaints start. Installation, repair, and cleaning all follow the same approach: fit the parts to the equipment, verify airflow after work, and document it. We’re an independent service provider, not a Lennox dealer.
We Also Service These Brands
Lennox is a focus, not a filter. We also service Trane and Carrier systems, and the same full-scope work applies: cleaning, coil cleaning, sealing, sanitizing, and dryer vent service. That matters for Gravesend landlords and property managers running more than one unit with mixed equipment. You don’t need a different provider for each brand.
FAQs – Lennox Air Duct Cleaning Service in Gravesend
No. We are an independent service provider and are not affiliated with, authorized by, or a dealer for Lennox. We repair and service Lennox equipment with quality parts that fit it, and we don’t imply manufacturer authorization. If you need warranty registration handled by the manufacturer, that’s between you and Lennox.
Yes, where fit and compatibility matter. We use Lennox OEM filters, gaskets, and coil components on systems where a poor-fitting part would throw off ECM blower behavior or communicating-system readings, and quality aftermarket flex duct, mastic, and foil tape for duct repairs. We don’t stock or order genuine Lennox parts as a standing practice.
Most Lennox duct and coil jobs in Gravesend run about half a day to a full day, depending on the size of the system and whether shared-wall return separation is needed. A two- or three-family house with a shared forced-air system takes longer than a single-family unit because each apartment’s return has to be isolated before cleaning starts. We set the scope and time in the written estimate before work begins.
We service and install Lennox Merit Series (ML, XC, and EL furnaces and air handlers), Elite Series (EL and XC variable-speed air handlers and furnaces), Signature Collection communicating systems (SL, XC, and XP), and Dave Lennox Signature Collection variable-capacity units. We also work on CX and CH series cased evaporator coils.
Cleaning and sealing done to spec shouldn’t void a Lennox manufacturer warranty. What complicates a warranty claim is undocumented work, an unrecorded disconnected return, or a matted coil left in place and blamed on the equipment. We photograph before and after, record static pressure readings, and document what was replaced, so you have a clear record if you ever need to file a claim.
There’s no single number because scope decides it: a single-family Lennox system with one return and a clean coil is a much smaller job than a three-family Gravesend house where each apartment’s return has to be separated and sealed first. We price one flat rate per system, agreed in a written estimate before any work starts, with no per-vent pricing and no bait-and-switch coupon that grows once the technician is on site. Full System Cleaning, Evaporator Coil Cleaning, and Duct Sealing are quoted as one scope so you know exactly what the flat rate covers. Call (844) 917-3975 for an exact quote. Estimates are free.
Not usually. An airflow fault on an iComfort thermostat more often traces to a leaky flex duct, a disconnected supply run, or a matted evaporator coil that’s restricting the ECM blower, rather than a failed board. Signature communicating systems report the fault they see, not the cause. We trace the duct run and check static pressure before anyone touches the board, which saves you the cost of a part you may not need.
Not inherently more prone, but different. Merit Series furnaces use PSC blowers, which collect lint on the squirrel-cage wheel and lose airflow as they load up, so dirty ducts show up as weaker heat. Elite and Signature variable-speed air handlers with ECM blowers compensate for restriction and run quietly until static pressure climbs, so duct problems stay hidden longer. Both need the same cleaning and sealing; the symptom timing is what differs.
Many CX and CH series cased coils can be cleaned in place when the matting is on the fin face and the coil isn’t damaged. We inspect the face, check delta-T and static pressure, and decide. If dust has worked into the coil and in-place cleaning won’t clear it, we’ll tell you the coil has to come out rather than charge for a clean that won’t fix the airflow.
Duct sealing done to spec shouldn’t affect a Lennox manufacturer warranty. Sealing the return plenum and disconnected flex runs reduces debris re-entry and helps your ECM or variable-speed air handler work the way it was designed. We document the sealing in writing so it’s part of your service record.
If the symptom is weak airflow, a short cycle, or mildew smell between heating and cooling season, start with a coil inspection and static pressure reading. Matted CX/CH coil faces cause those symptoms even when filters are changed regularly. If returns are leaky, the basement is dusty, or the ducts haven’t been cleaned, a full system clean plus sealing makes more sense. We check before we recommend. Call (844) 917-3975 with your symptoms and we’ll point you in the right direction.
Book Your Lennox Service in Gravesend, NY
Whether your Lennox system is a Merit furnace in a low basement or a Signature communicating unit with an iComfort thermostat logging faults, one flat price per system and a written scope come before any work starts. You see before-and-after photos of your own ducts. Call (844) 917-3975 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Gravesend.